A2212 1000KV Brushless Outrunner Motor Kit
Roll over image to zoom in
৳ 450.00৳ 500.00 (-10%)
This is an A2212 1000KV Brushless Outrunner Motor Kit, a highly popular and lightweight propulsion system designed for remote-controlled (RC) aircraft, drones, and hobby robotics. The “1000KV” rating indicates that the motor spins at 1,000 RPM per volt of applied electricity. The kit includes a high-efficiency outrunner motor pre-fitted with bullet connectors, alongside a complete hardware assembly pack for propeller mounting and frame installation.
Key Specifications
- Model Designation: A2212 / 13T
- Velocity Constant (KV): 1000 RPM/V
- Motor Type: Brushless DC (BLDC) Outrunner
- Recommended ESC: 30A Electronic Speed Controller
- Compatible Battery: 2S – 3S LiPo (Lithium Polymer)
- Typical Propellers: 1045, 1047, or 9050 sizes
The image displays an A2212 1000KV (13T) Brushless Outrunner Motor Kit, a highly efficient and widely used propulsion unit designed for remote-controlled (RC) airplanes, quadcopters, drones, and specialized robotics projects.
Core Architecture
- Outrunner Configuration: Features an external rotating bell housing embedded with permanent magnets that spins around a fixed inner stator core to maximize torque generation.
- Pre-Soldered Connections: Equipped with three heavy-gauge flexible phase wire extensions terminating in robust, gold-plated male bullet connectors.
- Heat Dissipation: Engineered with integrated cooling cutouts along the top of the aluminum rotor cap to exhaust air and maintain stable winding temperatures.
Technical Performance Attributes
- Velocity Constant (KV): Rated at 1000KV, indicating the shaft rotates at 1,000 RPM for every 1 Volt of electrical input under zero-load conditions.
- Stator Specifications: Utilizes a 22mm x 12mm stator core geometry wrapped with 13 turns (13T) of high-grade copper magnet wire.
- Thrust-to-Weight Efficiency: Optimized for running low-KV setups on 3S Lithium Polymer (LiPo) batteries to generate high thrust with minimal power consumption.
Included Mounting Accessories
- Propeller Adapter Kit: Packed with a threaded collet shaft, a matching compression sleeve, and an aerodynamic silver spinner nut to clamp propellers securely.
- X-Mount Plate: Contains a heavy-duty stamped metal cross-brace adapter to anchor the rear of the motor housing safely onto flat firewall surfaces.
- Fastener Hardwares: Includes four specialized machine mounting screws to mate the cross-brace securely to the motor base assembly.
Reviews
There are no reviews yet.