GY-87 10DOF IMU Sensor Module
Roll over image to zoom in
৳ 870.00৳ 1,000.00 (-13%)
The GY-87 10DOF IMU Sensor Module is a compact, high-precision tracking board that combines an MPU-6050 (3-axis accelerometer and 3-axis gyroscope), an HMC5883L (3-axis digital compass), and a BMP180 (barometric pressure and temperature sensor) onto a single PCB. Designed for advanced motion tracking and environmental monitoring, it provides 10 Degrees of Freedom (10DOF) data, making it ideal for drones, flight controllers, self-balancing robotics, and navigation systems.
Highlight Features
- All-in-One Sensing: Tracks 3D acceleration, rotation, heading, altitude, and temperature simultaneously.
- Wide Voltage Range: An onboard LDO regulator and logic level shifters ensure safe operation with 3V to 5V systems (compatible with Arduino, ESP32, and Raspberry Pi).
- Simplified Wiring: All three internal sensors communicate over a single shared I2C interface, conserving microcontroller pins.
If you are ready to connect the hardware, let me know:
- Which microcontroller board you are using?
- If you need a quick wiring guide for the pins (VCC, GND, SCL, SDA)?
GY-87 10DOF IMU Sensor Module
The GY-87 10DOF IMU Sensor Module is a high-performance, compact multi-sensor breakout board designed for advanced motion tracking, navigation, and environmental sensing. By integrating three highly accurate micro-electromechanical systems (MEMS) sensors into a single package, the board delivers 10 Degrees of Freedom (10DOF) data, tracking full 3D orientation, movement dynamics, and atmospheric metrics.
It serves as an all-in-one solution for flight controllers, autonomous drones, self-balancing robotics, and wearable navigation devices.
GY-87 10DOF IMU Sensor Module
🛠️ Core Embedded Sensors
The board splits its workloads across three specialized integrated circuits:
-
- MPU-6050 (6-Axis Inertial Measurement Unit): Combines a 3-axis accelerometer and a 3-axis gyroscope. It tracks linear acceleration (forces along the X, Y, and Z axes) and angular velocity (rotational tilt and pitch), processing complex movement dynamics smoothly.
- HMC5883L / QMC5883L (3-Axis Digital Compass): A highly precise surface-mount magnetometer. It calculates absolute headings by measuring the direction and intensity of Earth’s magnetic fields across three axes, preventing the orientation drift common in pure inertial systems.
- BMP180 (Barometric Pressure & Temperature Sensor): A high-resolution environmental sensor. By measuring absolute atmospheric pressure, it allows host controllers to calculate vertical altitude changes down to fractions of a meter, functioning as an accurate altimeter. It also records real-time ambient temperature data used to auto-calibrate internal readings.
GY-87 10DOF IMU Sensor Module
⚙️ Key Technical Features
-
- Integrated Power Management: Equipped with an onboard 3.3V Ultra-Low-Noise LDO Voltage Regulator. While the internal sensor chips run natively on 3.3V, the board can safely handle power inputs ranging from 3.0V to 5.0V DC.
- Built-in Logic Level Translation: Features onboard I2C logic level shifters. This allows the module to communicate cleanly without damaging components when connected to standard 5V microcontrollers (like the Arduino Uno) or 3.3V systems (like the ESP32 and Raspberry Pi).
- Single-Bus I2C Communication: All three chips share a single standard I2C serial bus interface (SCL and SDA pins), utilizing different I2C hardware addresses to save physical microcontroller pins and keep your wiring setup minimal.
- Premium Engineering Build: The module is manufactured on a high-grade double-sided blue PCB with clean immersion gold plating. It features clearly marked pin labels on both sides, directional alignment axes (X, Y, Z) printed directly onto the board, and a pre-drilled mounting hole for secure physical installation.
📋 Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | GY-87 / HW-290 |
| Degrees of Freedom | 10DOF (3-Axis Gyro, 3-Axis Accel, 3-Axis Mag, 1-Axis Pressure) |
| Input Voltage | 3.0V to 5.0V DC |
| Communication Protocol | Standard I2C Interface |
| Gyroscope Range | Up to ±2000°/s |
| Accelerometer Range | Up to ±16g |
| Magnetic Field Range | ±1.3 to ±8 Gauss |
| Pressure Range | 300 to 1100 hPa (Altitude +9000m to -500m relative to sea level) |
| Dimensions | 22 mm × 17 mm |
GY-87 10DOF IMU Sensor Module
If you are preparing to code this module, let me know:
-
- Which microcontroller or development board are you hooking it up to?
- Would you like a wiring connection diagram or a list of recommended Arduino IDE libraries to interface with all three sensors?
Reviews
There are no reviews yet.