DiliKS 900M-T-IS Bent Conical Soldering Iron Tip Replacement

## Product Overview
The DiliKS 900M-T-IS Bent Conical Soldering Iron Tip is an advanced, professional-grade micro-soldering component specifically engineered for intricate circuit modifications, microscope-assisted rework, and high-density surface mount technology (SMT) repair [Image Context]. Featuring an ultra-fine, needle-sharp tip with a distinct 30-degree curved apex (IS-Type), this specialized bit solves visibility and physical clearance obstacles [Image Context]. It allows tech professionals to maneuver around tall capacitors, shield cans, and neighboring connectors to apply precise heat exactly where it is needed without accidental contact damage.
——————————
## Premium Multi-Layer Material Construction
To deliver immediate thermal energy through a curved micro-profile while resisting extreme wear, the tip utilizes a precision composite layout:

* High-Purity Red Copper Core: Forged from oxygen-free copper to ensure exceptional thermal transfer rates, allowing the needle apex to quickly recover heat during sequential micro-joints.
* Dense Iron Plating Shield: Encases the copper core to protect the delicate fine point from dissolving, pitting, and eroding when exposed to molten solder and active flux chemistry.
* Corrosion-Proof Chrome Shell: The rear non-working barrel is finished with a chromium plating to resist scale oxidation and prevent accidental solder travel into the heating element sleeve.
* Factory Tinned Needle Apex: The functional bent tip comes pre-tinned with a premium lead-free alloy straight from the factory, promoting rapid solder wetting and preventing surface oxidation out of the box [Image Context].

——————————
## Technical Specifications

| Structural Component | Verified Specification Value |
|—|—|
| Brand / Model Designation | DiliKS Series / 900M-T-IS [Image Context] |
| Tip Profile Profile | Curved Micro Conical Point / Bent Needle Shape [Image Context] |
| Bend Angle Offset | Approximately 30° curvature path [Image Context] |
| Apex Tip Radius | Micro-fine ~0.20 mm to 0.40 mm point [Image Context] |
| Total Structural Length | 43.00 mm (Universal 900M chassis standard) |
| Outer / Inner Chamber Diameter | 6.50 mm / 4.00 mm |
| Alloy Compatibility | Fully optimized for Lead-Free and traditional Lead-Based solders |

——————————
## Hardware & Station Compatibility
Constructed with a universal hollow internal sleeve, this tip sits directly over internal ceramic heating cores. It is plug-and-play compatible with standard 936-style equipment, including:

* Hakko Systems: 936, 937, 928, 701, and 907 style soldering handpieces.
* Yihua, Aoyue, & Atten: 936, 936A, 937D, 852D+, 878D, and 898D rework benches.
* Generic Bench Hardware: Any desktop analog or digital heating base unit structured for standard 900M series replacement consumables.

——————————
## Common Use Cases

* Microscope Rework Visibility: Providing an unobstructed line of sight when soldering under a stereo or digital microscope, as the handpiece can be tilted further back while the curved tip makes flat contact [Image Context].
* Mobile & Laptop Logic Board Repair: Splicing broken micro-traces or soldering microscopic jumper wires (0.01mm – 0.02mm) underneath overlapping board layers or structural brackets.
* Fine-Pitch SMT Alignment: Tack-soldering tiny component corners (such as 0201 passives, micro-switches, and fine-pitch IC pins) inside densely packed device enclosures.
* Connector Restoration: Repairing interior row pins on multi-row surface mount connectors where standard straight tips cannot fit without melting the plastic housing wall.